Battery Thermal Management System Aerogel Insulation Ceramic Fiber Aerogel Felt flame retardancy
Looking for a highly efficient and lightweight solution to optimize the thermal insulation of your electric vehicle's battery? Look no further than our innovative aerogel insulation pad!
Crafted from a nano-insulation material with incredibly low thermal conductivity, our insulation pad ensures that your EV's battery stays at the ideal temperature for maximum efficiency and lifespan. Our energy-efficient insulation pad is easy to install, and designed to fit flat and prismatic cells, and the module to the cooling system. Its durable construction is capable of withstanding high temperatures, ensuring long-lasting performance.
Upgrade your electric vehicle with our aerogel insulation pad and experience the benefits of increased efficiency and lifespan. Say goodbye to thermal inefficiencies and hello to exceptional thermal insulation for your EV battery with our cutting-edge solution. Don't miss out on this game-changing innovation for your electric vehicle!
For more information on our aerogel insulation pad or to place an order, please don't hesitate to contact us. Our team is standing by to help you get the most out of your electric vehicle.
| SN |
Performance |
performance requirements |
| 1 |
Quality deviation rate |
Should not be greater than 15%. |
| 2 |
Thermal insulation performance |
The shrinkage rate of the length and width of the sample before and after the test should not be greater than 3%, and the test process should be within 5 minutes
The temperature of the cold side of the sample should not exceed 180°C. |
| 3 |
vertical burn |
It should meet the V0 requirements specified in GB/T 2408. |
| 4 |
Compression ratio |
It should not be less than 35% under 2Mpa pressure. |
| 5 |
tensile strength |
The length and width direction should not be less than 500Kpa. |
| 6 |
Insulation properties |
Surface thermal resistivity should be greater than 500MΩ; leakage rate should be less than 1mA. |
| 7 |
Prohibited and restricted substances |
Should comply with Directive 2011/65/EU. |
| 8 |
Aging resistance |
After aging, the tensile strength attenuation rate of the airgel heat insulation sheet should not exceed 30%;
The dimensional change rate should be less than 1%; the heat insulation performance should meet the requirements in the table. |
The main performance parameters are shown in Table
| Product number |
Pysheild BP-PAN |
| thickness |
1~10mm |
| wide |
1400±60mm(Customized) |
| color |
Black |
| Maximum operating temperature |
800℃(anaerobic) |
| density |
200±20kg/m3 |
| Thermal Conductivity |
≤0.025W/m*K@25℃ |
GB/T 10295-2008 |
| ≤0.030W/m*K@100℃ |
GB/T 10294-2008 |
| ≤0.036W/m*K@300℃ |
| ≤0.072W/m*K@500℃ |
| Combustion level |
A Grade |
GB/T 8624-2012 |
| V0 |
UL94-2013 |
| Hydrophobicity |
＞98% |
GB/T10299-2011 |
| biosecurity |
Comply with biosafety requirements |
RoHs/REACH/ELV |
| Burn-through resistance |
＞0.3MPa |
ASTM C273 |
| Insulation effect |
1mm:Min≥385℃；2mm:Min≥440℃
3mm:Min≥495℃；4mm:Min≥520℃ |
| Application field |
New energy passenger car batteries and modules are used for heat insulation, buffering, flame retardant, thermal runaway protection, etc. |
Typical Applications
The functions of heat insulation, buffering, flame retardancy, thermal runaway protection and other functions of new energy passenger vehicle cells and modules
Your message must be between 20-3,000 characters!
